BDH1
SLIDING BARN DOOR HARDWARE SET Coming Soon
- 6 Foot pole
- Pipe standard size: ∅ 25mm, Length 1800mm
- Designed for Wood Doors 1 -3/4" thick
- Top mounted hardware
- Door weight up to 176 lbs
- 304 Stainless Steel Track
- 304 Stainless Steel Hangers with nylon coated rollers
- Finishes Available: Brushed Stainless Steel
- View / Download Specification Sheet
BDH2
LATCH LOCK FOR BARN DOOR Coming Soon
"TEARDROP PRIVACY LOCK".
Mounts to door or door jamb for privacy on sliding doors. May also be used on pocket door jambs.
Reversible handing.
Wood screws included for mounting to wooden surfaces.
- Back Plate (1X)
- Front Plate (1X)
- 11/16" dia. washer (2X)
- 3/8 dia. washer (2X)
- #8X1-1/4" screw (2X)
- Strike Plate (1X)
- #4X3/4" screw (2X)
- Cordless Drill
- Drill bits (1/16"), 1/8" and 5/16"
- Spade bit (1/4")
- Philips screwdriver (#1 and #2)
- Chisel
For Emergency Access, slide a thin card such as a credit card upward to release the lock.
WARNING
If used on a pocket door, a 1/8" diameter through hole must be drilled behind the strike plate so that an object such as a paper clip can release the lock.
CHD5
PLASTIC DOWELS & DOWEL SCREWS New
- Plastic dowel and dowel screw for European hinge push-in type installation
- Typically used on manufactured wood products, where wood screws do not hold well
- The dowel measures 8.8mm diameter by 10mm long
- Depth of hinge cup: 10.5mm
- Dowel screw size is #4 flat head screw and is 10mm in length
- The drill bit size for the plastic dowel is 8mm or 5/16" (not included)
C1A
FIRE RATED DOOR CLOSER Coming Soon
Dual handed and universal for push or pull side mounting
- Euroline EL3800
- Finish: Silver
- UL and CUL Listed, ANSI Grade 1
- Apply to various kinds of duty doors, all weather fluid
- Cast Aluminum Alloy body, full plastic cover included:
- Needle bearing Forged Steel Arm
- Standard backcheck, optional delayed action
- Standard installation, top jamb and parallel arm installation
- Fire rated 3 hours
- Parallel arm included
CHF02
SOFT CLOSING FACE FRAME HINGES New
- Finish: NP
- Opening angle: 105°
- Dia. of hinge cup: 35mm
- Depth of hinge cup: 10.5mm
- Door Thickness: 14-26mm
- Dimension of door(K):3mm
- Available in 3/4” overlay
- View / Download Specification Sheet
CHF01
FRAMELESS INSET HINGE New
- Soft Closing
- 105 degree
LV6
SOLID STAINLESS STEEL SQUARE LEVER HANDLE New
As you open your cabinet door, this waste bin will pivot out and the lid will lift off.
- Material: SS304, Finish: Satin
- Accessories: 2 Set 54x54x8x1.0mm SS304 Square Rosette and Escutcheon with EP hole
EXCELLENT SUPPORT!
Just call or email Xclusive Products and we will be happy to help you.
P.O.S FACILITIES!
Yes we offer Point Of Sale facilites, visit for more information.
CONVENIENCE!
Situated in the beautiful and lush Parish of St. Thomas, Barbados. We are also mobile for optimum convenience.